Inductive sensor
IS M30
Metal enclosure
M30 x 1.5 thread
Flush mounting
Long life, no mechanical wear
Insensitive to soiling
With LED
With pre-wired cable or plug-in connector
IS M30b 10AAAC PNP NO ST2
IS M30b 10AAACA PNP NO 2m
Technical data
General technical data
Applied standards
EN 60947-5-2
Enclosure
brass, nickeled
Front cap
polycarbonate
Degree of protection
IP67 (IEC/EN 60529)
Connection
cable PVC (Ø max. 4.6 mm)
Switching elements
1 NO contact, PNP, 3-wire
Rated switching distance sn
10 mm
Correction factors
Steel (Fe360) = 1;
Rated operating voltage range UB
10 … 30 VDC
Residual ripple
≤ 10 %
Switching current
max. 0.2 A
Voltage drop at Ie
max. 1.8 V
Current absorption
< 15 mA at 24 VDC
Hysteresis
approx. 10 %
Switching frequency
300 Hz
Repeatability
≤ 3 %
Protection circuit
Inductive interference protection, protection against polarity reversal, short-circuit and overload proof
LED display
lights up yellow on actuation
Ambient temperature
–25 °C … +85 °C