Inductive sensor
IS M12
Metal enclosure
M12 x 1 thread
Flush mounting
Long life, no mechanical wear
Insensitive to soiling
With LED
With pre-wired cable or plug-in connector
IS M12b 2AAAC PNP NO ST2
IS M12b 2AAACA PNP NO 2m
IS M12b 4AAAC PNP NO ST2
IS M12b 4AAACA PNP NO 2m
Technical data
General technical data
Applied standards
EN 60947-5-2
Enclosure
brass, nickeled
Front cap
POM
Degree of protection
IP67 (IEC/EN 60529)
Connection
cable PVC (Ø max. 4.1 mm)
Switching elements
1 NO contact, PNP, 3-wire
Rated switching distance sn
2 mm or 4 mm
Correction factors
Steel (Fe360) = 1;
Rated operating voltage range UB
10 … 30 VDC
Residual ripple
≤ 10 %
Switching current
max. 0.2 A
Voltage drop at Ie
max. 1.8 V
Current absorption
< 15 mA at 24 VDC
Hysteresis
approx. 10 %
Switching frequency
1000 Hz
Repeatability
≤ 3 %
Protection circuit
Inductive interference protection, protection against polarity reversal, short-circuit and overload proof
LED display
lights up yellow on actuation
Ambient temperature
–25 °C … +85 °C