Position switch with safety function
ES 13 W-S 2Ö/1S - 1m
Article no.: 1184022 Old article no.: 13902001
contact usProduct features
Thermoplastic enclosure
Double insulated X
Suitable for in-line mounting
With pre-wired cable
Cable entry on side
Actuator: Plunger with collar W
Actuating speed max. 0.5 m/s with a vertical actuating angle of 0°
Watertight collar for protection against penetration of dirt
Technical data
General technical data
Applied standards
EN ISO 13849-1, EN 60947-5-1, EN ISO 14119
Enclosure
thermoplastic, glass-fibre reinforced, impact resistant, self-extinguishing UL 94 V-0
Switch type
type 1
Coding level
no coding
Tightening torque
enclosure mounting screws: max. 5 Nm
Degree of protection
IP67 (IEC/EN 60529)
B10d (10 % load)
2 million
TM
max. 20 years
Contact material
silver
Switching system
slow action, positive break NC contacts A
Switching elements
2 NC/1 NO contact, type Zb
Connection
cable 6 x AWG 20
Cable cross-section
6 x 0.56 mm²
Cable length
1 m
Rated impulse withstand voltage Uimp
4 kV
Rated insulation voltage Ui
250 V
Conventional thermal current Ithe
6 A
Rated operating current/voltage Ie/Ue
6 A/250 VAC; 0.25 A/230 VDC; 4 A/24 VDC
Utilisation category
AC-15; DC-13
Short-circuit protection
6 A gG/gN fuse
Ambient temperature
–20 °C … +75 °C
Mechanical life
> 1 million operations
Operation cycles
max. 1800/h
Repeat accuracy of switching points
± 0.1 mm
Contact opening
max. 2 x 3.5 mm
Approvals
]
Downloads
Variants / Options
The following variants / options are available on request:
Cable entry on side
Gold-plated contacts
Connector M12 x 1, 4-pole
Connector M12 x 1, 5-pole
Other interesting products
Position switch with safety function
ES 13 W-S 2Ö/1S - 1mArticle no.: 1184022 Old article no.: 13902001
contact us